Toshiba TECRA S4 Maintenance Manual page 311

4.27 Hinge
2. Remove the following screw and SPG GND VGA fin.
• M2×3S
3. Remove the following screws and take out the right hinge from the hole of the
middle frame by moving it to the left.
• M2.5×6S
TECRA S3 Maintenance Manual (960-532)
S-FLAT HEAD screw
Tapping screw
M2.5×6S Tapping
M2×3S S-FLAT HEAD
SPG GND VGA fin
Hinge (right)
Figure 4-52 Removing the hinge (right)
4 Replacement Procedures
×1
×2
M2.5×6S Tapping
[CONFIDENTIAL] 4-69