Safety And Regulatory Notices - Mitsubishi Electric Apricot LS series Owner's Handbook Manual

SAFETY AND REGULATORY NOTICES

General
Electrical
Battery
Laser products
The computer uses a safety ground and must be earthed.
The system unit AC power cord is its 'disconnect device'. Ensure that the
system unit is positioned close to the AC power outlet and that the plug is
easily accessible.
The power cord packed with the computer complies with the safety
standards applicable in the country in which it is first sold. Use only this
power cord. Do not substitute a power cord from any other equipment.
To prevent fire and electric shock, do not expose any part of the computer
to rain or moisture. Turn off the computer and unplug all power cords
before moving or cleaning the system unit, or removing the system unit top
cover.
This product contains a lithium battery.
Do not use a metal or other conductive implement to remove the battery. If
a short-circuit is made between its positive and negative terminals the
battery may explode.
Replace a discharged battery with one of the same type; another type may
explode or ignite. Follow the instructions contained in the Owner's
Handbook to replace the battery. Dispose of a discharged battery promptly
and in accordance with the battery manufacturer's recommended
instructions. Do not recharge, disassemble or incinerate the discharged
battery. Keep away from children.
Any CD-ROM drive fitted in this system is classified as a CLASS 1 LASER
PRODUCT according to IEC825 Radiation Safety of Laser Products
(Equipment Classification: Requirements and User's Guide). The CLASS 1
LASER PRODUCT label is located on the underside of the system unit.
The CD-ROM drive contains a laser system which is harmful to the eyes if
exposed. Do not attempt to disassemble the CD-ROM drive; if a fault
occurs, call an authorised maintainer.
Use the CD-ROM drive only as described in this manual. Failure to do so
may result in exposure to hazardous radiation.
LS SERIES HANDBOOK i