Download  Print this page

Safety And Regulatory Notices - Mitsubishi Electric Apricot LS660 Owner's Handbook Manual

Hide thumbs



Laser products
The computer uses a safety ground and must be earthed.
The system unit AC power cord is its 'disconnect device'. Ensure that the
system unit is positioned close to the AC power outlet and that the plug is
easily accessible. The power cord packed with the computer complies with
the safety standards applicable in the country in which it is first sold. Use
only this power cord. Do not substitute a power cord from any other
To prevent fire and electric shock, do not expose any part of the computer
to rain or moisture and turn off the computer and unplug all power cords
before moving or cleaning the system unit, or removing any system cover.
This product contains a lithium battery:
Do not use a metal or other conductive implement to remove the battery. If
a short-circuit is made between its positive and negative terminals the
battery may explode.
Replace a discharged configuration (CMOS) battery with one of the same
type. Dispose of the battery in accordance with the manufacturer's
recommended instructions and Do not attempt to recharge, disassemble or
incinerate the discharged battery. Keep away from children.
Any CD-ROM drive fitted in this system is classified as a CLASS 1 LASER
PRODUCT according to IEC825 Radiation Safety of Laser Products
(Equipment Classification: Requirements and User's Guide). The CLASS 1
LASER PRODUCT label is located on the underside of the system unit.
It will be in high visibility colours and bear the details shown above.
Use the CD-ROM drive only as described in this manual. Failure to do so
may result in exposure to hazardous radiation.
When positioning the system unit, monitor and keyboard, take into
account any local or national regulations relating to ergonomic


Table of Contents

This manual is also suitable for:

Apricot vs660

Comments to this Manuals

Symbols: 0
Latest comments: