Network Boot; Multi-Boot Facility - Mitsubishi Electric Apricot LS series Owner's Handbook Manual

B I O S S e t u p & P O S T
Reserving ISA legacy resources

Multi-boot facility

Press <F2> to enter setup or <ESC> to enter Boot Menu
7/4 LS HANDBOOK
To reserve interrupts and upper memory block (UMB) regions for
ISA expansion cards, go to the Advanced menu, select PCI
Configuration, then select PCI/PNP ISA IRQ Resource Exclusion
or PCI/PNP ISA UMB Region Exclusion as required.
Immediately after the first screen, where you are asked to enter your
fingerprinting password, a second screen displays various POST
messages such as the memory test. While this screen is on display, a
message at the bottom says:
If you press the <ESC> key this menu will appear:
Boot Menu
1. Diskette Drive
2. Removable Devices
3. Hard Disk Drive
4. ATAPI CD-ROM Drive

5. Network Boot

< Enter Setup>
This menu can be used to temporarily use another drive or device
to boot your system, for example a bootable CD-ROM, without
having to enter the BIOS setup. Simply use the up and down
arrows to make a selection. This change will not be permanent and
the system boot will revert to the normal BIOS setting the next
time you switch on your system.