Mitsubishi Electric Apricot LS series Owner's Handbook Manual page 9

S A F E T Y & R E G U L A T O R Y N O T I C E S
Standards
Safety
Electro-magnetic Compatibility (EMC)
Notes
Legalities
iv LS SERIES HANDBOOK
This product complies with the International safety standard IEC950 and
the European safety standard EN60950 which will, when applicable,
include the national deviations for the country in which it is sold.
This product complies with the following European EMC standards:
Emissions EN50022 Class B
Immunity EN50082-1
This product also complies with the following International EMC
standards:
VCCI Class A
All interconnecting cables (for example, signal and communication cables)
should be less than 2 metres in length. If cable extensions are used, ensure
adequate earth connections are provided and screened cables are used.
If any metal casework components are removed, during upgrade work for
example, ensure that all metal parts are correctly re-assembled and all
internal and external screws are re-fitted and correctly tightened.
This equipment complies with the relevant clauses of the following
European Directives (and all subsequent amendments):
Low Voltage Directive
EMC Directive
Telecommunications Directive
CE Marking Directive
IMPORTANT
This system (when sold) complies with the CE Marking Directive and its
strict legal requirements. Use only parts tested and approved by Mitsubishi
Electric PC Division. Failure to do so may result in invalidating both the
compliance and your warranty. All expansion cards, drives and peripherals
must carry the CE mark.
(Japan)
73/23/EEC
89/336/EEC
91/263/EEC
93/68/EEC