Replacing The Mains Supply Cable - Baumatic PO900SS User Instruction

o If when the oven is first switched on, it does not function
correctly, you should recheck that the terminal scre
all fully tightened between the links. This should be done
before contacting the Customer Care Department.
IMPORTANT: The appliance must NOT be connected to the
o
mains supply by means of a 13A plug and socket.
The cable can be looped if necessary, but make sure that is not
o
kinked or tr apped when the oven is in position. Care must be
ta ken to avoid the cable being in contact with hot parts of the
appliance.

Replacing the mains supply cable

If the mains supply cable is damaged, then it must be replaced with a
suitable replacement.
T he mains supply cable should be replaced in accordance with the
following instructions:
o Switch the appliance off at the socket.
o Open the terminal block on the back of the ove
o Unscrew the terminal screws fixing the cable.
o Replace the cable with one of the same length and in accordance
with the specification given on page 26.
The "green-yel
o
m arked . It must be about 10 mm longer than the live and
neutral wires.
The "blue" neutral wire must be c
o
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).
low" earth wire must be connected to the terminal
n.
onnected to the terminal
ws are
28