Replacing The Mains Supply Cable - Baumatic BO988BL Instruction Manual

If when the oven is first switched on, it does not function
o
correctly, you should recheck that the terminal screws are
all fully tightened between the links. This sho
before contacting the Customer Care Department.
IMPORTANT: The appliance must NOT be connected to the
o
mains supply by means of a 13A plug and socket.
T he cable can be looped if necessary, but make sure that is not
o
kinked or trapped when the ov
taken to avoid the cable being in contact with hot parts of the
appliance.
R eplacing the mains supply cable
If the mains supply cab
s uitable replacement.
T e h mains supply cable should be replaced in accordance with the
following instructions:-
o Switch the appliance off at the socket.
o Open the terminal block on the back of the oven.
o Unscrew the terminal screws fixing the cable.
Replace the cable with one of the same length and in accordan
o
with the specification given on page 28.
o The "green-yellow" earth wire must be connected to the ter
marked . It must be about 10 mm longer than the live and
neutral wires.
o The "blue" neutral wire must be connected to the terminal
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).
en is in position. Care must be
le is damaged, then it must be replaced with a
uld be done
ce
minal
29