4.
Signal strength of the last packet received. The values displayed in this
field should generally be between 20 and 60. If a packet is not received
successfully, the signal strength field is dashed out (--).
5.
Current frequency correction factor. Shows the Automatic Frequency
Control setting.
6.
Frequency index of the next packet to be received.
7.
Current number of consecutive bad packets.
8.
The number of times that the Phase Lock Loop did not lock.
9.
Current streak of consecutive good packets received.
Console Firmware Versions
In some cases, the problem may be that your console firmware doesn't support
what you are trying to do. Use this command to determine the firmware revi-
sion level in your console. You can find more information on Vantage Pro2
console firmware versions and changes in the Weather Software Support sec-
tion of our website. - for information.
Press and hold DONE then press the up arrow at the same time to display the
console firmware version in the ticker at the bottom of the screen.
Console Maintenance
Changing Batteries
Use this procedure to change console batteries without losing any stored
weather data or console configuration settings.
1.
Plug in the AC adapter or, if the AC adapter is not present, enter Setup
Mode by pressing DONE and then the down arrow.
Entering Setup Mode makes sure the station isn't writing any data to
memory when power is removed.
2.
Remove the battery cover located on the back of the console by pressing
down on the two latches at the top of the cover.
3.
Place the console face down on a flat, firm surface.
4.
Insert a fingertip between the two exposed batteries then press the middle
battery down toward the notch (toward the "hidden" battery). This will
relieve tension on the first battery and allow you to remove it.
5.
Remove the old batteries and install the new batteries.
6.
Replace the battery cover and remove the AC power adapter, if used.
One Year Limited Warranty
For details on our warranty policy, please refer to the Maintenance, Service,
and Repair Information brochure included with your station.
Console Maintenance
*
‡
*
‡
40
Need help?
Do you have a question about the Vantage Pro2 Console and is the answer not in the manual?