Wind Speed and Direction
1. Press WIND to select wind speed.
2. Wind speed may be displayed in miles per hour (m.p.h.), kilome-
ters per hour (km/h), meters per second (m/s), and knots (knots).
The 10 minute average wind speed will be displayed in the ticker.
A solid arrow within the compass rose indicates the current wind direction.
Arrow caps indicate up to six different 10-minute dominant wind directions
to provide a history of the dominant wind directions for the past hour.
3. Press WIND a second time to display the wind direction in degrees instead
of the wind speed.
Note:
When displayed in degrees, Due North displays as 360
2005 or later. Previous releases marked Due North at 0
Each additional WIND key press toggles the display between wind speed
and wind direction in degrees.
Outside and Inside Temperature
1. Press TEMP to select outside temperature.
Temperature may be displayed in degrees Fahrenheit (ºF) or
Celsius (ºC). Temperatures can also be displayed in degrees or
in tenths of a degree.
2. Press TEMP again to select inside temperature.
Each consecutive press of TEMP displays temperature readings for any
optional temperature, temperature/humidity, soil temperature, soil moisture
stations also connected to your console. The order of the optional sensors
readings display depends on your station configuration. Temperatures for
temperature stations display, with soil temperature and moisture stations
displaying consecutively.
HUM IN
N
WIND
NW
NE
TEMP OUT
W
E
MPH
TEMP IN
SW
SE
S
Last 24 hrs
Every 1
hr
DAILY RAIN
Vertical Scale:
X10
Humidity, Pressure, Dew Point & Wind Chill
º
HUM OUT
pm
HUM OUT
BAROMETER
F
hPa
HUM IN
F
F
HEAT INDEX
RAIN
YEAR
in
in
STATION NO.1
Selecting Units of Measure
for consoles with firmware dated May
º
.
BAROMETER
DEW POINT
F
CHILL
F
WIND
TEMP
hPa
20
Need help?
Do you have a question about the Vantage Pro2 Console and is the answer not in the manual?