DAVIS Vantage Pro2 Console Manual page 15

2. Use the arrows to scroll through the list of available transmitter IDs and
select the ID for your console.
3. Press DONE to move to the next screen.
Note: Make a note of the ID selected for retransmit. The console that receives the data from the con-
sole you have selected to retransmit should be configured to receive the transmitter ID you
selected. See "Screen 2: Configuring Transmitter IDs — Wireless Only" on page 10 for more
information.
Screen 4: Time & Date
The very first time you power-up the console, the time and date are set to
12:00AM January 1
To change the time and date:
1. Press the right and left arrows to select the hour, minute, month, day or year.
The selected time or date setting blinks on and off.
2. To change a setting, press the up and down arrows to adjust the value up or
down.
To choose a 12-hour or 24-hour clock, first select either the hour or minute
setting, then press 2ND and immediately press UNITS. This toggles the
clock setting between the two clock types.
To choose between a MM/DD or DD.MM display for the date, first select
either the day or month setting, then press 2ND and immediately press
UNITS. This switches the console from one date display to the other.
3. Press DONE to move to the next screen.
Screen 5: Latitude
The console uses latitude along with longitude to determine your location,
allowing it to adjust the forecast and calculate the times for sunset and sunrise.
st
, 2005. Be sure to enter the correct date and local time.
Screen 4: Time & Date
Setup Mode
a m
12