Highs And Lows Mode - DAVIS Vantage Pro2 Console Manual

For vantage pro2 & vantage pro2 plus weather stations
Hide thumbs Also See for Vantage Pro2 Console:
Table of Contents

Advertisement

Highs and Lows Mode

Clearing Weather Variables
The following weather variables can be cleared:
• Barometer—Clears any pressure offset used to calibrate the station, and
the elevation entry.
• Wind—Clears the wind direction calibration.
• Daily rain—Clearing the daily rain value is reflected in the daily rain total,
the last 15 minutes of rain, the last three hours of rain sent to the forecast
algorithm, the umbrella icon, and the monthly and yearly rain totals. Clear
the daily rain total if the station accidentally recorded rain when the ISS was
installed.
• Monthly rain—Clears the monthly rain total. Does not affect the yearly
rain total.
• Yearly rain—Clears the yearly rain total.
• Daily ET—Clears daily ET and subtracts the old daily ET total from the
monthly and yearly ET totals.
• Monthly ET—Clears the current monthly ET total. Does not affect the
yearly ET total.
• Yearly ET—Clears the current yearly ET total.
To clear a single weather variable:
1. Select the weather variable.
See "Selecting Weather Variables" on page 18.
2. Press and release 2ND, then press and hold CLEAR.
The variable you've chosen blinks. Keep holding the key until the value
changes to zero or, in the case of the barometer, the raw barometer value.
Clearing the barometer value also clears the elevation setting.
Clear All Command
This command clears all stored high and low weather data including monthly
and yearly highs and lows and clears alarm settings all at once.
1. Press WIND on the console.
2. Press 2ND then press and hold CLEAR for at least six seconds.
3. Release CLEAR when "CLEARING NOW" displays at the bottom of the
console's screen.
Highs and Lows Mode
The Vantage Pro2 records highs and lows for many weather conditions over
three different periods: days, months, and years. Except for Yearly Rainfall, all
high and low registers are cleared automatically at the end of each period.
For example, daily highs are cleared at midnight, monthly highs are cleared at
month–end midnight, yearly highs are cleared at year–end midnight. You may
27

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vantage Pro2 Console and is the answer not in the manual?

This manual is also suitable for:

Vantage pro2 plus

Table of Contents

Save PDF