Image Data Information - Reconyx Hyperfire Manual

Image Data Information

Your RECONYX™ HyperFire™ camera stores Image Data along with every
picture it takes. Some of this information is displayed in Image Data bands above
and below the image.
 An M or T in the top data band indicates a "motion" or "time-lapse" event.
 "1/3" indicates the first in a sequence of three pictures for that event.
 Moon Phases displayed include:
(first quarter),
(last quarter), and
 An "Illumination"
infrared illuminator is used.
TIP: There is additional image data accessible using MapView
camera serial number, firmware version, battery voltage, and much more.
23
(waxing gibbous),
(waning crescent).
indicator appears in the Image Data bands, when the
(new moon),
(full moon),
(waxing crescent),
(waning gibbous),
; including
TM
©RECONYX, Inc.