Reconyx Hyperfire Manual page 17

Level 2: Advanced Settings (continued)
Resolution – Set image size to 1080p or
(SM750 has 720p
Night Mode - Adjust the night time exposure (SC950 only)
These settings will NOT affect daytime images.

BALANCED
speed and flash range

High Quality - higher quality images, reduced flash range

Fast Shutter - reduced motion blur, reduced flash range

Max Range – increased range, reduced image quality
NOTE: SM750 does not have Night Mode option – it is optimized for license
plate capture day and night.
Date/Time/Temp – Set date, time and temp. (FAHRENHEIT, Celsius).
CodeLoc™ – Use CodeLoc to add a four-digit security code to your camera to
prevent unauthorized use of your camera in the event of tampering or theft. You
can also change or remove an existing code.
TIP: Write your four-digit CodeLoc code in the space available on the last page
of this manual.
User Label – Add a label (up to 16 characters) that will be included with all
photos taken by your camera. You can also view, change, or clear an existing
label.
Use Defaults – Remove any changes you've made to your camera's settings
and restore the factory default settings (shown above in
Main Menu – Go back to the Main menu.
www.reconyx.com
and 1.3MP options available).
- best combination to balance image quality, shutter
3.1MP
RED CAPITAL letters).
16