Locking & Securing Your Camera - Reconyx Hyperfire Manual

Locking & Securing Your Camera
There are a number of options to securely mount your camera.
1) Use a Master Python Lock™ by threading it through the Lock Tunnel in the
camera to secure it to a tree or another object. This will prevent the camera
from being easily removed.
2) If you would like to secure the camera from being opened, you can use a
small padlock in the "Padlock Loop" near the latch. For increased security,
there are a number of security enclosures available: Including the standard
"HyperFire™ Security Enclosure" made from 16 gauge steel; or the "Heavy
Duty HyperFire™ Security Enclosure", made from 1/8" steel.
NOTE: Both security enclosures feature a weather resistant powder
coated finish, and are able to be lag bolted to an object and/or can
be used with a Python Lock™ through the enclosure as well as
the camera.
(Accessories not included)
HyperFire™ Security Enclosure
TIP: Be sure to enable the Codeloc™ feature on your camera for additional
security.
TIP: RECONYX™ sells an array of accessories for mounting, securing and
disguising your camera to protect your investment; including Heavy Duty Security
Enclosures, Padlocks, Python Locks™, Cable Boxes and more.
Go to www.reconyx.com for more information on accessories.
19
Master Python Lock™ w/padlock
©RECONYX, Inc.