HyperFire & RapidFire ™ ™ Security Cameras Security Settings User Guide Table of Contents Changing Your Camera’s Trigger Schedule ......1 Scheduling Options ..............2 III. Configuring Your Schedules ..........3 Cellular Programing Options ..........4 Saving and Transferring Settings to Your Camera ..... 5 Copyright: January 2013...
RapidFire camera trigger schedules can be adjusted from your personal computer using the “RECONYX Security Camera Scheduling” software. The camera’s trigger schedules control when the camera is “awake” to sense motion triggers and take pictures. The camera schedules are stored on your memory card and transferred to your camera when you insert the card in the camera and turn the camera on.
Likewise, if nobody is around on weekends, you may want it to take pictures all day. You can do both by setting up Schedule 1 and Schedule 2 like the example below. www.reconyx.com...
The status photo will verify that the camera is running, positioned as you left it, and allow you to check the battery level using the included “RECONYX Mobile” software. The status photo that is sent will be marked with an “S” (status) to the right of the Date/Time Stamp.
Page 7
While every effort has been made to ensure that the information contained in this “User Guide” is accurate and complete, no liability can be accepted for any errors or omissions. RECONYX reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.