Reconyx Hyperfire Manual page 13

HYPERFIRE™ Programming Menu
Your camera includes two major levels of options:
Level 1: Main menu
Level 2: Advanced settings
The programming menus are set up so that the most commonly used items are at
the top level. Other camera settings that are not as frequently accessed do not
show up every time you are setting up or moving your camera.
NOTE: As with the date and time, you can move through and select any of
the menu options by pressing the << and >> buttons to scroll, and
the OK button when the menu or option you want to select is
displayed.
TIP: Use the "Programming Diagram" on the next page for a better
understanding of how the options are
accessed on your HyperFire™ camera.
The backlit LCD includes two lines of
information. The top line displays the
menu, option, or setting you are currently accessing; after you make a selection,
it may also display additional information. The bottom line displays the available
options/settings. Selections you can choose from are always displayed between
< > brackets on the bottom line.
You can change your camera settings
any time you like, either prior to using the
camera, or in the field. Likewise, you can
switch memory cards as needed, and check the remaining space on your
memory card as well as your remaining battery power.
NOTE: The camera will remember the settings even when shut off, so you
do not need to reconfigure the camera unless you want to change
its behavior.
www.reconyx.com 12