Reconyx Hyperfire Manual page 11

Memory Card - File System Requirements
Secure Digital cards have various speeds and capacities. Larger capacity cards
are capable of storing more images. Your HyperFire™ camera can accept cards
up to 32GB, but most users will find 4GB and 8GB cards to be more than
adequate for normal use.
Cards with higher speed ratings are capable of reading and writing images faster.
This is advantageous when taking RapidFire NearVideo sequences of
TM TM
images – especially when used in the SM750 for license plate capture.
Troubleshooting your memory card
If you have a memory card that does not seem to work, or you used the card in
another device, you may have to re-format your memory card. This can be done
with the included MapView™ software under the "Tools" menu item or with any
Windows® Operating System.
Windows® – Steps to format memory card
Step 1: Insert your memory card into your computer's card reader.
Step 2: Click "Start -> My Computer". You should see your memory card under
the list of available drives. Be sure to check its contents first to make sure that
you have the right drive.
Step 3: Right-click on the drive and choose 'Format'.
Step 4: Under "File system" select the "FAT32" option then click on 'Start'.
Step 5: Once the process is completed, take the memory card out and insert it
into your Camera.
TIP: We recommend that you purchase two memory cards per camera so that
you can swap cards in the field.
™
You can purchase RECONYX certified memory cards at www.reconyx.com
www.reconyx.com 10