Table of Contents
Advertisement
Precautions
Never install telephone wiring during a lightning storm
Never install telephone jacks in wet locations unless the jack is specifically designed for wet
conditions.
Use caution when installing or modifying telephone lines
Never do any installation of cables without first unplugging the power cords of the applicable
equipment.
Unpacking
To unpack and install the Director System, it is recommended (at the very least) that you have the
following tools:
#2 Phillips
#2 Flathead
5/32 hex key
diagonal wire cutters
flathead "tweaker"
razor or knife
Robertson square head screwdriver
PC (with installed Crestron software, com port) for setup and diagnostics
Smartboard Software
The "entire system" consists of the following components:
TANDBERG Director Module (1box)
• External cable pack (1box)
Codec Accessories (WAVE Camera, additional mics, network cables)
AudioScience Mic (1box)
Touchpanel (optional, 1 box)
Smart 3000i (optional, 1 big box)
• Smart 3000i Camera Shelf
• Smart Room Control Module (RCM)
• Smart software
Customer supplied PC (optional)
Smartboard Specific
(please skip over this section if you did not purchase the 3000i Smartboard option)
6 6 6 6
Advertisement
Table of Contents
