Ir Functions; Audio - TANDBERG Director Installation Manual

Codec software version b5, control software version v1

Hide thumbs Also See for Director:

Table of Contents

IR Functions

Selecting the IR Functions button will display a both near and far end video outputs as well as all

the buttons found on the TANDBERG remote control.. You can use any of these buttons to

emulate button pushes on the remote.

Choosing thee Audio button will display the Audio inputs and outputs of the codec. Touching the

+ or – For each input will raise or lower the gain of each input. Inputs may also be

disabled/enabled by touching the icon in the middle of each respective input.

(Note: When in the normal presentation and videoconference pages and the VCR source is

selected, the system will automatically turn on and off Audio Input 6 corresponding to that video

input.)

Table of Contents