Table of Contents
Advertisement
Zero Power Mode
When your receiver is off, even in Sleep Mode, the power board
will continue to draw power from the batteries. This means that
if you fully charge your receiver, turn it off and store it, the
receiver will drain its battery power in less than two months. To
stop the power board from draining the batteries, you can put
your receiver in Zero Power Mode.
1. Turn on your receiver.
2. Press and hold the power key for more than 8 seconds, but
less than 14 seconds.
3. Release the power key when both LEDs become red. When
the LEDs turn off, your receiver will be in Zero Power
Mode.
4. Press the Reset key for about one second to return to
Normal mode.
NOTICE
NOTICE
When the internal batteries have completely discharged
and no external power is connected, the receiver will go
into Zero Power Mode automatically to prevent the
batteries from over discharging.
P/N 7010-0557
Changing Receiver Modes
www.topconpositioning.com
4-21
Advertisement
Table of Contents
