W-Lan Connection With The Controller; Mode A Connection; Mode B Connection - Topcon LN-100 Instruction Manual

5.2

W-LAN Connection with the Controller

There are two methods to set up a W-LAN connection between the instrument and the controller:
 Mode A connection
This is a one-to-one connection using the instrument as a master machine and the controller as a
slave machine for W-LAN connection. When using the Mode A connection, the instrument performs
as a DHCP server.

For details of the connection method, refer to the instruction manual of W-LAN Config for LN-100.
Slave machine
 Mode B connection
Connect via other access point (as the master machine) using the instrument and the controller as
slave machines for W-LAN connection.

For details of the connection method, refer to the instruction manual of W-LAN Config for LN-100.

• The network settings of Mode A and Mode B are saved one each.
Master machine
Master machine
Slave
machine
15
5. PREPARATION