Topcon A3524 Manual
  1. Manuals
  2. Brands
  3. Topcon Manuals
  4. GPS
  5. A3524
  6. Manual
Topcon A3524 Manual

Topcon A3524 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Topcon Hiper-AG GPS Manual
Part Number A3524
Rev. 1.1
© Copyright Topcon Precision Agriculture
March, 2008
All contents in this manual are copyrighted by Topcon. All rights
reserved. The information contained herein may not be used, accessed,
copied, stored, displayed, sold, modified, published or distributed, or
otherwise reproduced without express written consent from Topcon.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A3524 and is the answer not in the manual?

Questions and answers

Related Manuals for Topcon A3524

Summary of Contents for Topcon A3524

  • Page 1 Rev. 1.1 © Copyright Topcon Precision Agriculture March, 2008 All contents in this manual are copyrighted by Topcon. All rights reserved. The information contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published or distributed, or otherwise reproduced without express written consent from Topcon.

  • Page 3: Table Of Contents

    Positioning ..................5-4 Indicator LEDs ..................5-5 Switching the Hiper-AG ON............... 5-5 Chapter 6 Installing Topcon Hiper-AG RTK Fixed Base Station . 6-1 Required Components ................. 6-1 Configuration ..................6-2 Mounting Location ................6-2 Using the Hiper-AG RTK Mobile Base Station........6-2 Topcon Hiper-AG unit ................
  • Page 4 Enhancing GPS and Radio performance ..........6-8 Self-Amalgamating Tape ..............6-11 UHF Colinear Antenna cable - RG213 ..........6-11 Chapter 7 Configuring Topcon Hiper-AG RTK Base Station (Fixed and Mobile) ..............7-1 Setup Program ..................7-2 Single Base Station Setup ..............7-6 Add Position to List ................

  • Page 5: Preface

    This manual has been developed to provide you with the information necessary to operate and maintain this Topcon Precision Agriculture (TPA) product. Proper service and use is important for the safe and reliable operation of the product. The sections provided in this manual include information necessary for the safe and correct operation, care, and troubleshooting of this product.

  • Page 6: Limited Warranty

    WEBSITE and OTHER STATEMENTS - No statement con- tained at the website of TPA or any other Topcon Group company or in any other advertisements or TPA literature or made by an...
  • Page 7 You indemnify and hold TPA harmless against any claim, action, damage, loss, liability or cost (including legal fees) which TPA incurs arising from (a) your operation, use and/ or maintenance of the product other that in accordance with the A3524 Rev 1.1...
  • Page 8 Topcon GPS Manual terms set out in this manual, or (b) your negligence or wrongful act or omission in respect of the product. Other These Terms and Conditions may be amended, modified, super- seded or cancelled, at any time by TPA. These Terms and Condi-...

  • Page 9: Service Information

    Topcon GPS Manual Service Information Service assistance can be provided by contacting your local TPA Authorized Dealer or by calling the Topcon Precision Agriculture Service Centre. Phone: +61 8 8203 3300 Fax: +61 8 8203 3399 8.30am to 5pm (Adelaide Local Time), Monday through Friday.

  • Page 10: Manual Conventions

    Topcon GPS Manual Manual Conventions This Manual uses the following conventions: File>Exit ~ Click/tap/press the File menu, then click/tap/press Exit. Enter ~ Click/tap/press the button or key labelled Enter. Supplementary information that can help you configure, maintain, or set up a system.

  • Page 11: Chapter 2 Introduction

    Introduction ntroduction The purpose of this manual is to facilitate the installation and commissioning of the Hiper-AG GPS system available from Topcon Precision Agriculture. This manual will cover how to setup your Hiper-AG unit as a fixed or mobile base station. Fixed base stations generally have better range than a mobile base station.
  • Page 12 Topcon GPS Manual Notes: www.topconpa.com...

  • Page 13: Using This Manual

    Chapter 6 “Installing Topcon Hiper-AG RTK Fixed Base Station” explains how to install the Hiper-AG as a Fixed Base Station • Chapter 7 “Configuring Topcon Hiper-AG RTK Base Station (Fixed and Mobile)” explains how to configure the Topcon Hiper- AG RTK Base Station software A3525 Rev 1.1...
  • Page 14 Topcon GPS Manual Notes: www.topconpa.com...

  • Page 15: Overview Of Hiper-Ag Gps Receiver

    External Power Function (PWR) Port Serial Ports (FN) button Figure 4-1. Topcon Hiper-AG Layout Functions • Power ON/OFF button—To power the Hiper-AG ON or OFF hold down the Power button for 2 seconds • GPS Status LED—This light indicates what satellites are...
  • Page 16 Topcon GPS Manual Each red flash of the STAT light indicates that a Glonass (Russian) satellite is visible • Serial Ports—Transmits data to the console • Reset Button—Used for soft resets of the GMS. Do not use the RESET button unless instructed to by a properly trained technician •...

  • Page 17: Installing Topcon Hiper-Ag Rtk Mobile Base Station

    Installing Topcon Hiper-AG RTK Mobile Base Station nstalling Topcon Hiper- AG RTK Mobile Base Station The Hiper-AG RTK Base Station can be used in two different configurations; either as a low-power mobile RTK Base Station or as a high-power permanently fixed RTK Base Station (see Chapter 6).
  • Page 18 Topcon GPS Manual USB Port Serial Ports Communication Cable in Serial Port (connects to X20 console’s COM1 Port) External Red- Power shrouded (PWR) Port ODU cable Figure 5-1. Hiper-AG Ports WARNING WARNING Do not plug the External Power cable into the USB port.

  • Page 19: Connect Uhf Antenna

    Installing Topcon Hiper-AG RTK Mobile Base Station Communication Cable: Connects to COM 1 Communication Cable: Connects to GPS Port Figure 5-2. Connecting the Communication cable Connect UHF Antenna Figure 5-3. UHF Port On the back of your Hiper-AG find the port labeled UHF Antenna.

  • Page 20: Positioning

    Topcon GPS Manual Positioning The positioning of the Hiper-AG base must be in a clear area that does not have trees, buildings or other obstructions nearby. • A 330’ (100m) radius is the minimum area required • The higher the base is mounted, the better the radio coverage •...

  • Page 21: Indicator Leds

    Installing Topcon Hiper-AG RTK Mobile Base Station Indicator LEDs If none of the LEDs flash when the unit is powered ON the unit may be in a Zero Power State (normally shipped in this state). To rectify this press the RESET button.
  • Page 22 Topcon GPS Manual Notes: www.topconpa.com...

  • Page 23: Installing Topcon Hiper-Ag Rtk Fixed Base Station

    Installing Topcon Hiper-AG RTK Fixed Base Station nstalling Topcon Hiper- AG RTK Fixed Base Station The Hiper-AG RTK fixed Base Station differs from the Hiper-AG mobile Base Station in that it incorporates a high-gain antenna (Figure 6-1) and the radio power can be increased to its maximum output.

  • Page 24: Configuration

    Using the Hiper-AG as a Mobile Base Station To use the Hiper-AG as a mobile Base Station remove the UHF Radio Antenna, and the power source (see “Installing Topcon Hiper-AG RTK Mobile Base Station”, Chapter 5). www.topconpa.com...

  • Page 25: Topcon Hiper-Ag Unit

    Installing Topcon Hiper-AG RTK Fixed Base Station Topcon Hiper-AG unit (Bayonet) GPS Fitting Connector Figure 6-3. Hiper-AG unit Topcon UHF Radio The high-gain Collinear (fishing pole) Antenna (Figure 6-1 on page 6-1) is connected to the BNC Connector of the Hiper-AG unit (Figure 6-3 on page 6-2), via a thick black RG213 cable.

  • Page 26: Pg-A1 Rtk Gps Antenna With Ground Plane

    Topcon GPS Manual PG-A1 RTK GPS Antenna with Ground Plane Connector Figure 6-4. PG-A1 RTK GPS Antenna The PG-A1 RTK GPS Antenna (Figure 6-4) is connected to the GPS fit- ting of the Hiper-AG Base (Figure 6-3 on page 6-3) via a 5m cable with threaded TNC connectors at each end.

  • Page 27: Power Connection

    Installing Topcon Hiper-AG RTK Fixed Base Station Power Connection A power cable is supplied fo the Hiper-AG unit. The power leads are fitted with 3 amp automotive blade fuses. CAUTION CAUTION Do not change the 3 amp automotive blade fuses to a higher rating as damage to the radio and/or GPS could result.

  • Page 28: Uhf Colinear Antenna

    Topcon GPS Manual UHF Collinear Antenna The Hiper-AG fixed Base Station will transmit to its maximum range if it is connected to a series-fed UHF Collinear Antenna (see “UHF Col- linear Antenna Cable-RG213”, page 6-11). UHF Collinear Antennae are custom-tuned to the user’s frequency and are constructed for null fill coverage and optimized range, for sites that have an average height above ground level of less than 2000 metres.

  • Page 29: Lightning Arrestor

    Installing Topcon Hiper-AG RTK Fixed Base Station Lightning Arrestor Connects to RG213 antenna cable from PA-6 amplifier Connects to the bottom Connects to of the UHF independent Collinear ground Antenna connection Figure 6-6. N-350NB Lightning Arrestor The N-350NB Lightning Arrestor safeguards expensive electronic equipment from damage caused by static electricity and lightning induced surges, at a budget price.

  • Page 30: Enhancing Gps And Radio Performance

    Topcon GPS Manual Enhancing GPS and Radio Performance Please note: The Antenna Mast is to be supplied by the end user, and is not included in the Hiper-AG Base Station kit. The following diagram and description is the ideal GPS and Radio Antenna support bracket.
  • Page 31 Installing Topcon Hiper-AG RTK Fixed Base Station WARNING WARNING Ensure the GPS Antenna Plate does not sit over the structure’s roof. This may cause “multi-pathing of the signal”, which will render the system unusable. Antenna mast (secured to UHF Antenna...
  • Page 32 Topcon GPS Manual Buildings reflect the GPS signal to the tractor as shown in Figure 6-8 (page 6-9). Mounting the GPS Antenna directly above the outbuilding roof will result in the same confused input messages. Make sure the GPS antenna is mounted above and to the side of the outbuilding (Figure 6-9).

  • Page 33: Self-Amalgamating Tape

    Installing Topcon Hiper-AG RTK Fixed Base Station Self-Amalgamating Tape Self-amalgamating tape is supplied. Using the tape to seal all external antenna connections is recommended. The use of this tape will reduce the chance of water ingress with consequent transmission failures.
  • Page 34 Installing Topcon Hiper-AG RTK Fixed Base Station Notes: 6-12 A3524 Rev 1.1...

  • Page 35: Configuring Topcon Hiper-Ag Rtk Base Station

    Configuring Topcon Hiper-AG RTK Base Station (Mobile and Fixed) onfiguring Topcon Hiper-AG RTK Base Station (Fixed and Mobile) Figure 7-1. Accessing Setup Program Press STOP>SETuP (Figure 7-1) when the Guidance program is starting to access the Setup program Select GPS from the Setup Selection window...

  • Page 36: Setup Program

    The GPS Setup program has been developed with the end-user in mind. It enables users and service personnel to setup and problem solve Topcon’s and other brands of GPS used in Guidance and Steering-assist applications. Once the program is loaded into the X20 console, the screen shown in Figure 7-3 (on page 7-3) will be displayed.
  • Page 37 Configuring Topcon Hiper-AG RTK Base Station (Mobile and Fixed) Figure 7-3. Auto Connect Button Select Auto Connect (Figure 7-3) to connect the GPS Status Bar Figure 7-4. Green Status Bar and Next Button Select Hiper GA as your receiver (Figure 7-4)
  • Page 38 Topcon GPS Manual Status Boxes Figure 7-5. Diagnostics>Status Tab The next screen to be displayed is the Status screen of the Diagnostics tab. Note that only one of the status boxes is green with numbers and the rest are red without numbers inside. This is normal as a Base Station does not need this data (a Rover GPS does however).
  • Page 39 Configuring Topcon Hiper-AG RTK Base Station (Mobile and Fixed) Differential Source tab (Figure 9-6 on page 9-4) Select the Base Station Setup window Figure 7-7. Set to Base Station Set to Base Station (Figure 7-6) to set the Hiper-AG as a...

  • Page 40: Single Base Station Setup

    Topcon GPS Manual Single Base Station Setup Figure 7-8. Set to Base Station If Single Base Station was selected in step 6 on page 7-5 and the OK button was pressed the program will display the window shown in Figure 7-8.
  • Page 41 Configuring Topcon Hiper-AG RTK Base Station (Mobile and Fixed) Figure 7-10. Set Base Station Position Button Set Base Station Position (Figure 7-10) Select The Set Base Station Position window will display (Figure 7-11) Figure 7-11. Set Base Station Position Screen...
  • Page 42 Topcon GPS Manual stabilizes to within 0.5m of each other. Set position (Figure To set the Base at the current position select 7-11) Other options include: • Auto Base— This will average positions for 3 minutes and set the averaged position into the receiver automatically •...

  • Page 43: Add Position To List

    Configuring Topcon Hiper-AG RTK Base Station (Mobile and Fixed) Add Position to List Figure 7-12. Save Current Position to List Add Position to List (Figure 7-12) to Select save the current position to the list It is advisable to use this option to backup Base Station location data.

  • Page 44: Recalling Base Station Position From List

    Topcon GPS Manual Recalling Base Station Position from List Figure 7-13. Accessing the List recalled and used instead of the current position in the GPS receiver’s memory. Select Get Position From List (Figure 7-13) Figure 7-14. Get saved position Select ▼ next to...

  • Page 45: Multi-Base Station Setup

    Configuring Topcon Hiper-AG RTK Base Station (Mobile and Fixed) Multi-Base Station Setup If you selected Multi-Base Station in step 9 on page 7-5 follow these instructions. If there is a network of similar Base Stations in the vicinity that can be used, then you should have selected the Multi-Base Station option in step 6 on page 7-5.
  • Page 46 Topcon GPS Manual The program will then display the message shown in Figure 7-16 once the Base Station is set up successfully. Figure 7-16. Success OK (Figure 7-16) Press Follow the steps on pages 7-7 to 7-9 to set and save the Base Station position To recall a position follow the steps on page 7-10.
  • Page 47 Topcon GPS Manual ndex Index LEDs 4-1, 4-2, 5-5 BATT 4-2 GPS 4-1 RX 4-2 Antenna Mast 6-7 Lightning Arrestor 6-6 AW400Tc UHF radio 5-4, 6-3 CAUTION 6-6 Assembly 5-4 power 6-1 Hiper-AG Functions 4-1 Base Station Position 7-7 Layout 4-1...
  • Page 48 Topcon GPS Manual Radio Performance 6-7 Reset 4-2, 5-5 RG213 cable 6-3, 6-10 RTK GPS antenna 6-8 SAFETY 1-2 Self-Amalgamating Tape 6-10 Service Information 1-5 Setup program 7-1, 7-2 Status tab 7-4 Terms and Conditions 1-1 APPLICATION 1-1 COPYRIGHT 1-1...

This manual is also suitable for:

Hiper-ag

Table of Contents