Figure 38 ─ Storage Screen - Mitsubishi Electric DX-TL16U User Manual

User's Manual
Storage Screen (STATUS  Storage Tab)
The Storage screen displays the Disk Bad, Temperature and S.M.A.R.T. information of the storage device.
 Disk Bad ─ Displays the damage status of the storage drive. (Not Formatted (The device is not formatted),
Good (%) (The device is working properly though some portion (%) of the storage is damaged.) or Bad
(More than 90% of the storage is damaged.))
 Temperature ─ Displays the temperature of the storage drive. (N/A (The DVR cannot read the temperature.),
Good (The temperature is normal.) or Bad (The temperature is 70
 S.M.A.R.T. ─ Displays S.M.A.R.T. information of the storage. (Good (The storage condition is normal.),
Bad (Data cannot be written on or read from the storage drive.) or N/A (The S.M.A.R.T. monitoring is
not working or supported.))
NOTE: When the S.M.A.R.T. displays Bad, the screen displays a message box. Once the "Bad"
message displays, replacing the hard disk drive is recommended, usually within 24 hours.
NOTE: Temperature and S.M.A.R.T. information will be available only for internal hard disk drives
supporting the SMART (Self-Monitoring Analysis and Reporting Technology) monitoring program.
44
Figure 38 ─ Storage screen.
o o
C (158 F) or higher.))