Reference Table 2, Models 001, 002, And 003 Error Messages - IBM 4247 Maintenance Information

Table 17. Model A00 Error Messages (continued)
Message
JUMPER AND KEYS

Reference Table 2, Models 001, 002, and 003 Error Messages

Table 18. Error Messages for Models 001, 002, and 003
Message
001 END OF FORMS
001 END OF FORMS
002 FORMS JAMMED FRONT TRACTOR
CLEAR JAM AND RELOAD FORMS
005 MARGIN ERROR
ADJUST MARGIN OR LINE LENGTH
Description
Manufacturing use only.
Description
Forms do not load when Load/Eject is
pressed.
No forms movement.
Forms are visible between the printhead
and the platen.
Forms path sensor cannot sense paper.
Jam detected at the front tractor sensor.
Left margin incorrect.
Action
1. Remove the jumper from the bottom of
the operator panel.
2. Install a new EMI filter assembly (used
only with early-level logic boards). See
"EMI Filter (Model A00 Early-Level
Logic Board Only)" on page 377.
3. Install a new operator panel. See
"Operator Panel" on page 355.
4. Install a new operator panel cable.
5. Install a new logic board. See "Logic
Board - Model A00" on page 370.
Action
See "MAP 0130: No Paper Movement" on
page 62.
See "MAP 0131: Paper Path Sensor" on
page 66.
See "MAP 0190: Form Feed Problems" on
page 101.
Press Stop, then Start. Left margin value
will be reset to 10 for current line only.
Chapter 1. Diagnosing Problems
136