Aux Operation - Jensen JCR-263 Instruction Manual

II. This receiver has a built-in bar antenna. If the AM reception is week, slightly rotate or re-positioning
the unit will usually improve the reception.
THIS UNIT FEATURES AN AUX LINE-IN JACK FOR CONNECTING YOUR iPod, MP3 PLAYER OR OTHER
DIGITAL MUSIC PLAYER.
1. Connect the headphone jack of your external device to the AUX IN Jack (# 8) located on the back of the
(cable not included).
JＣＲ－２６３
2. Turn on the
JＣＲ－２６３
3. Start playing your iPod, MP3 player or other external audio device.
4. Slowly adjust both volume controls on the
5. Turn off your iPod, MP3 player etc. when finish listening.
ＪＣＲ－２６３
6. Turn the
The allows you to set two different wake up times that you can choose to use independently, as ALARM
JＣＲ-２６３
1, ALARM 2 or simultaneously together.
The provides wake to
JＣＲ-２６３
Setting ALARM Time（ｓ）Ａｎｄ Wake Up Mode
Note: Ｔｈｅ Alarm time（ｓ）can be set ｅｉｔｈｅｒ in
1. Set the Clock Set Selector (# 18) to AL1
ＡＬＡＲＭ 2 (AL2) Indicator will appear with 'AM 12:00' blinking in the Display.
2. While the 'AM 12:00' is blinking, press and hold the TIME SET
backward rapidly.
3. Keep pressing and release the
Minute digits will advance forward or backward rapidly.
Keep pressing and release the Buttons when the displayed clock time is close to the desired alarm
4.
time. Repeatedly press the ! or " Buttons to adjust the alarm time precisely.
Note: Make sure the hour is set so that AM or PM is correctly displayed.
5. Set the Clock Set Selector (# 18) to the "LOCK" position to complete the setting.
or
6. If you want to be woke up by ALARM 1 ｏｒ ＡＬＡＲＭ２, press ALARM1 (# 1) ｏｒ ＡＬＡＲＭ２
Button (# 17) once．Ｔｈｅ respective
the 'Wａｋｅ ｔｏ Bｕｚｚｅｒ'ｉｃｏｎ ｗｉｌｌ ａｐｐｅａｒ ｉｎ ｔｈｅ Ｄｉｓｐｌａｙ．
Ｐｒｅｓｓ ｔｈｅ
Ｗａｋｅｕｐ ｍｏｄｅ ｆｒｏｍ ｂｕｚｚｅｒ（ ）ｔｏ ｒａｄｉｏ（

AUX OPERATION

and set the FUNCTION Selector (# 9) to the "AUX" position.
JＣＲ－２６３
off and unplug the AUX Line-IN jack.
ＳＥＴＴＩＮＧ ALARM ＴＩＭＥ AND WAKE UP MODE
ALARM BUZZER ｏｐｔｉｏｎｓ
or
RADIO
TIME SET ! or " Buttons (# 15 or # 16) to adjust the time. The Hour and
Ｉｎｄｉｃａｔｏｒ ｄｉｓａｐｐｅａｒs
ＡＬＡＲＭ Ｉｎｄｉｃａｔｏｒ
respective Ａlarm Ｂｕｕｔｏn
and the external device.
ＰＯＷＥＲ ＯＮ
ｏｒ ＡＬ２. Ｔｈｅ
! or "
ｉｎ ｔｈｅ ＬＣＤ Ｄｉｓｐｌａｙ．
ａｇａｉｎ
5
．
ｏｒ
ＯＦＦ
mode.
respective ALARM 1 (AL1)
Buttons. The Digits will skip forward or
, Ａｌａｒｍ ｔｉｍｅ ａｎｄ
ｗｉｌｌ ｓｗｉｔｃｈ
）．
ｏｒ
ｔｈｅ