Aux Operation; Dimmer Control; Sleep Function; Specifications - Jensen JCR-228 User Manual

You can play other music sources (iPod, MP3 or other digital audio players) through
the speakers of the JCR-228 by connecting the AUX IN Jack (#12 ) to your external
player's audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN Jack (#12) and the
other end of the cable to the headphone jack of your digital audio player.
2. Press the MODE /
Display show AU.
3. Start playing the device you plugged into the AUX IN Jack (#12).
4. Slowly adjust both the volume controls of the JCR-228 and the external device
until you reach a comfortable listening level.
5. Turn off your iPod, MP3 player etc. when finish listening.
6. Press and hold the MODE /
unplug the AUX IN Jack.
Notes :
If you connect the JCR-228 to the Line-Out Jack of your external device, you
•
only need to adjust the VOLUME CONTROL of your JCR-228. If you connect to
the Headphone Jack of your external device, you may need to adjust both the
volume controls of your external device and the JCR-228 to obtain the desirable
listening level.
Remember to turn off the JCR-228 when you have finished listening. Don't forget
•
to switch off the power of your external audio device as well.
Press the DIMMER Button (#8) briefly to select LED Display brightness.
This function allows you to program the system to turn itself OFF after a set period of
time. You can set your sleep time while in Power On ( Radio, AUX or Bluetooth )
mode:
1. To activate the sleep function, press the SLEEP button (#11) repeatedly on the
unit, the display will show "90, 80, 70, 60, 50, 40, 30, 20, 10, OFF in sequence.
2. When the display shows your desired sleep time, release the button, the sleep
timer is now activated, the SLEEP Indicator will Turn On. The display show "10"
is to indicate "10 minutes" sleep time and so on. When the sleep time counts to
zero, the unit will go off.
Power :
Backup battery :
Frequency Range :

AUX OPERATION

Button (#6) repeatedly to select the AUX mode, The LED
Button (#6) 5 seconds to turn the JCR-228 off and

DIMMER CONTROL

SLEEP FUNCTION

SPECIFICATIONS

AC 120V ~ 60Hz 7W
2 x AA (UM-3) (not included), for clock backup.
FM 87.5 – 108 MHz
AM 520 – 1710 KHz
E-10