Related Manuals for Jensen JCR-263
Summary of Contents for Jensen JCR-263
- Page 1 JCR-263 AM/FM DUAL ALARM CLOCK RADIO INSTRUCTION MANUAL PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Read these instructions Keep these instructions Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. -
Page 3: Protect Your Furniture
PROTECT YOUR FURNITURE!! This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. -
Page 4: Power Source
This AM/FM Dual Alarm Clock Radio operates on AC 240V~ 50Hz line power supply. 2 ‘AA’ (UM-3) alkaline batteries (Not included) are also required to retain the normal and alarm time settings in the event of a power outage. AC OPERATION Plug the AC Power Cord into the AC 240V~ 50Hz power source. -
Page 5: Time Setting
NOTE: The clock has to be set when you first plug it in. The following procedure illustrates the setting of the Clock using 7:30 PM as an example time. Connect the AC cord to an AC 240V~ 50 Hz power outlet. The LCD will show “AM 12 : 00” Note: Make sure to use an outlet that is always “live”. -
Page 6: Aux Operation
II. This receiver has a built-in bar antenna. If the AM reception is week, slightly rotate or re-positioning the unit will usually improve the reception. THIS UNIT FEATURES AN AUX LINE-IN JACK FOR CONNECTING YOUR iPod, MP3 PLAYER OR OTHER DIGITAL MUSIC PLAYER. - Page 7 ６． When the preset wake up time is reached the selected wakeup mode turns “On”. The respective ＡＬ１ ｏｒ ＡＬ２） ALARM Indicator（ The alarm will continue to sound and last for ３ 0 minutes before turning off automatically. The alarm remains set and will turn the ７．...
- Page 8 Follow step 1-3 (shown above) under the “ADJUSTING THE SLEEP PERIOD” section to set the desired SLEEP time. The JCR-263 is now programmed to turn off automatically at the Sleep Time you selected and then to turn on again at the preset “Alarm Time”.
-
Page 9: Care And Maintenance
IMPORTANT: Remember that the station and volume settings you choose for the SLEEP TO MUSIC operation are the same settings you will hear if you set the alarm for wake to radio the following morning. There are four interchangeable top and front lens’ in assorted colors included that can be used in place of the panels that come pre-installed. - Page 10 SERVICE All necessary care is taken at the point of manufacture to ensure this unit will perform to the Jensen’s high quality standards. However if this unit becomes faulty within the warranty period please return it to the point of purchase with your proof of purchase for a replacement. When returning the unit, please remove any batteries to prevent damage to the unit in transit and/or from possible battery leakage.