Viewing General Information - NETGEAR ProSafe WG102 Reference Manual
802.11g wireless access point
Hide thumbs
Also See for ProSafe WG102:
- Reference manual (118 pages) ,
- User manual (23 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
You can use a SysLog server to view the Activity Log. If you have a SysLog server on your LAN,
then enable the SysLog. If enabled, you must enter the IP address of your SysLog server and the
port number that your SysLog server uses.
•
SysLog Server IP address: The access point sends all the SysLog to the specified IP address if
SysLog option is enabled. Default: 0.0.0.0
•
Port: The port number configured in the SysLog server on your LAN. The default is 514
The Activity Log Window displays the Access Point system activity.
You can click Refresh to update the display. To save the log contents into a file on your PC, click
Save As and save the file to a disk drive.
Viewing General Information
The General information is a summary of the WG102 configuration settings. From the WG102
main menu, click General to view the screen shown below.
Figure 4-2
4-2
v1.0, November 2005
Advertisement
Table of Contents
