NETGEAR ProSafe WG102 Reference Manual page 67

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Examples of wireless bridged configurations are:
• Point-to-Point Bridge. The WG102 communicates with another bridge-mode wireless station.
See "Point-to-Point Bridge Configuration" on page
• Multi-Point Bridge. The WG102 is the "master" for a group of bridge-mode wireless stations.
Then all traffic is sent to this "master," rather than to other access points. See
Bridge Configuration" on page
• Repeater with Wireless Client Association. Sends all traffic to the remote AP. See
with Wireless Client Association" on page
These configurations can be set up from the
Advanced Access Point Settings menu, shown
to the right.
5-8.
5-9.
5-11.
v1.0, November 2005
"Multi-Point
"Repeater
Figure 5-6
5-7