NETGEAR ProSafe WG102 Reference Manual page 48

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
4. Choose to use the local MAC address database stored on the access point, or use the RADIUS
MAC address database stored on a RADIUS server.
• If you choose the RADIUS MAC Address Database, you must configure the RADIUS
Server Settings first.
• If you choose Local MAC Address Database, either select from the list of available
wireless cards the WG102 has found in your area, or enter the MAC address and device
name for a device you plan to use. You can usually find the MAC address printed on the
wireless adapter. Click Add to add the wireless device to the access list. Repeat these steps
for each additional device you want to add to the list.
5. Be sure to click Apply to save your wireless access control list settings.
Now, only devices on this list will be allowed to wirelessly connect to the WG102.
3-24
v1.0, November 2005