Advanced Configuration
5.
This chapter describes how to configure the advanced features of the wireless access point. The
chapter includes the following sections:
•
Configure IPv6 Settings and Optional DHCPv6 Server Settings
•
Configure Spanning Tree Protocol, 802.1Q VLAN, and Link Layer Discovery Protocol
•
Configure Hotspot Settings
•
Configure Advanced Wireless Settings
•
Configure Advanced Quality of Service Settings
•
Configure Quality of Service Policies
•
Configure Wireless Bridging
Configure IPv6 Settings and Optional DHCPv6 Server
Settings
The wireless access point supports IPv6:
•
You can manage the wireless access point from an IPv6 address.
•
The wireless access point can function as an IPv6 DHCP client.
•
The DHCPv6 server of the wireless access point can allocate IPv6 addresses to its
wireless clients, either through stateless or stateful allocation.
Configure the IPv6 Settings
Note:
For information about how to configure the IPv4 settings, see
Configure the IPv4 Settings
on page 25.
99
5