Chapter 5 Advanced Configuration; Configuring Ethernet Links - NETGEAR ProSafe WG102-500 Reference Manual
802.11g wireless access point
Hide thumbs
Also See for ProSafe WG102-500:
- Installation manual (2 pages) ,
- Reference manual (52 pages)
Table of Contents
Advertisement
5.
Advanced Configuration
This chapter describes how to configure the advanced features of your wireless access
point. This chapter includes:
•
Configuring Ethernet Links
•
"Configuring Hotspots (Captive Portals)" on page 96
•
"Configuring Advanced Wireless Settings" on page 98
•
"Configuring Neighbor AP Discovery" on page 101
•
"Configuring Wireless Bridging and Repeating" on page 102
Configuring Ethernet Links
The Ethernet link settings allow you to select the type of Ethernet link for the wireless access
point.
To configure Ethernet links:
1.
Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2.
Select Configuration > Advanced > Ethernet. The Ethernet settings screen displays.
on this page.
5
| 95
Advertisement
Table of Contents
Troubleshooting
