Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
b. Click the Basic Settings link to view the
Basic Settings menu.
c. Configure the settings for your network
and click Apply.
d. Click Wireless Settings in the Setup
section of the main menu to view the
Wireless Settings menu.
e. Enter the wireless settings. See the online help or
instructions.
Note: In the US, the Country/Region is preset according to regulatory
requirements. In other areas, you can and must set the Country/Region. It
may not be legal to operate the wireless access point in a region other than
one of those identified in this field.
Now that you have finished the setup, you are ready to deploy the WG102 in your network. If
needed, you can now reconfigure the computer you used in for this process back to its original
TCP/IP settings.
Figure 3-3
Figure 3-4
"Wireless Settings" on page 3-12
v1.0, November 2005
for full
3-7