Configuring Network Authentication - NETGEAR ProSafe WG102 Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
• Accounting Radius Server Configuration. This configuration is required for accounting
using Radius Server. IP Address, Port No. and Shared Secret is required for communication
with Radius Server. A Secondary Radius Server can be configured which is used on failure on
Primary Radius Server.
• IP Address. The IP address of the Radius Server. The default is 0.0.0.0.
• Port Number. Port number of the Radius Server. The default is 1813.
• Shared Secret. This is shared between the Wireless Access Point and the Radius Server while
authenticating the supplicant.

Configuring Network Authentication

Follow the steps below:
1. Connect to the WG102.
Log in at the default LAN address of http://192.168.0.229 with the user name of admin and
default password of password, or using the LAN address and password that you set up.
2. If you are using Radius Server Settings, set them up first, as described in
Radius Server Settings" on page
3. Set the Network Authentication that you
want to use.
a. On the Security menu, click Security
Profiles Settings.
b. Select the profile that you want.
c. Click Edit to view the Security Profiles
Configuration menu.
d. Choose the type of Network
Authentication that you want from the
list.
3-20.
Figure 3-11
v1.0, November 2005
"Configuring the
3-21