Table Of Alarm Codes Of The Main Pcb - Electrolux ENV06 Service Manual

10 Table of alarm codes of the main PCB

Alarm
Tap closed or water pressure too low; Drain tube improperly positioned; Water fill
E11 solenoid valve is faulty; Leaks from water circuit on pressure switch; Pressure switch
faulty; Wiring faulty; PCB faulty.
Tap closed or water pressure too low; Drain tube improperly positioned; Water fill
E12 solenoid valve is faulty; Leaks from water circuit on pressure switch; Pressure switch
faulty; Wiring faulty; PCB faulty.
Drain tube improperly positioned; Water pressure too low;
E13 Water fill solenoid valve is faulty; Water circuit on pressure switch is leaking/clogged;
Pressure switch faulty.
Drain tube kinked/clogged/improperly positioned; Drain filter clogged/dirty; Drain
E21 pump faulty; Pressure switch faulty; Wiring faulty; PCB faulty; Electrical current leak
between heating element and ground.
Drain tube kinked/clogged/improperly positioned; Drain filter clogged/dirty; Drain
E22 pump faulty; Pressure switch faulty; Wiring faulty; PCB faulty; Electrical current leak
between heating element and ground.
E23 Drain pump faulty; Wiring faulty; PCB faulty.
E24 PCB faulty.
Pressure switch;
E31 Wiring;
Main PCB.
Drain tube kinked/clogged/improperly positioned; Drain filter clogged/dirty; Drain
pump faulty;
E32
Water circuit on pressure switch; pressure switch;
Wiring; main board.
Water fill solenoid valve is faulty; Leaks from water circuit on pressure switch;
E35
Pressure switch faulty; Wiring faulty; PCB faulty.
Water circuit on pressure switches;
E38 Pressure switches;
Motor belt broken.
E3A PCB faulty.
Door lock unit faulty; Wiring faulty;
E41
PCB faulty.
SOI/DT 2007-10 dmm
Possible fault
40/48
Action/machine status
Cycle is paused with door locked.
Cycle is paused with door locked.
Cycle is paused with door locked.
Cycle is paused (after 2 attempts).
Cycle is paused
Safety drain cycle - Cycle stops with
door unlocked.
Safety drain cycle - Cycle stops with
door unlocked.
Cycle stops with door locked.
Cycle is paused.
Cycle stops. Safety drain cycle.
Drain pump continues to operate (5
min. on, then 5 min. off, etc.).
Heating phase is skipped.
Cycle stops with door locked.
Cycle is paused.
Reset
START/RESET
START/RESET
START/RESET
START/RESET
START/RESET
RESET
RESET
RESET
START/RESET
RESET
ON/OFF RESET
RESET
START/RESET
599 70 27-90