Electrolux ENV06 Service Manual page 47

a. Lift the control panel up and extract it.
b. Rotate the control panel around itself.
c. Place it as indicated in figure paying attention not to scrape it.
e. Remove the screws and release the hooks which secure the board
casing to the control panel.
f. Before mounting the new board extract the knob pressing the
hooks indicated by the arrows as represented in figure.
While re-assembling repeat the same operations in reverse order
and pay attention to position correctly the knob.
SOI/DT 2007-10 dmm
47/48
599 70 27-90