Lcd And Buttons - Electrolux ENV06 Service Manual

3.3.3

LCD and buttons

♦ After turning the programme knob, the higher part
of the display (black background and white
characters) shows:
On the left, the programme name, on the right its
duration and below the end-of-cycle time. The
duration of the programme is calculated
automatically on the basis of the max load for each
type of fabric and the time is updated every minute.
♦ On the left, bottom of the display, you can find:
-the temperature degrees of the programme;
-the spin speed of the programme.
♦ After some seconds the display shows:
«Press Start to run program» (P6).
♦
LED off : appliance off or the washing programme
has finished.
♦
LED flashing: the programme has been selected
and it is possible to push the Start
button to run the programme.
♦
LED fixed: the appliance is performing a washing
cycle.
♦ TEMPERATURE (P1)
If the temperature set by the programme it is not
ok, modify it pushing button P1. The variation is
indicated with some levels 95°,60°,50°,40°,30° and
cold cycle.
Above, the variation is shown by means of a scale.
The selection of the cold cycle is represented by
the symbol.
♦ SPIN (P2)
If the spin set by the programme it is not ok, it is
possible to modify it pushing button P2. The
variation is indicated through some levels 1800,
1600, 1400, 1200, 1000, 800, 600, 400, Night cycle
and Rinse hold.
Above, the variation is shown by means of a scale.
The selection of a Night cycle is represented by the
symbol. .
The selection of Rinse hold is represented by
symbol.
SOI/DT 2007-10 dmm
8/48
599 70 27-90