Alarm Summary Table - Electrolux EWM09 Service Manual

5.3

Alarm Summary Table

Description
Water fill difficulty during washing
Water leaks
Drain difficulty during washing
Faulty triac for drain pump
Malfunction in sensing circuit on
triac for drain pump
Technical Support - A.D.L. 02 / 2011
Possible fault
Tap closed.
Water pressure too low.
Drain pipe improperly positioned.
Water fill solenoid valve faulty.
Leaks from pressure switch water circuit.
Pressure switch faulty.
Faulty wiring.
Main circuit board faulty.
Drain pipe improperly positioned.
Water pressure too low.
Water fill solenoid valve faulty.
Leaks/clogging of pressure switch water circuit.
Pressure switch faulty.
Drain tube kinked/clogged/improperly positioned.
Drain filter clogged/dirty.
Faulty wiring.
Pressure switch faulty.
Drain pump rotor blocked.
Drain pump faulty.
Main circuit board faulty.
Faulty wiring.
Drain pump faulty.
Main circuit board faulty.
Main circuit board faulty.
Cycle is paused with door locked
Cycle is paused with door locked
Cycle is paused (after 2 attempts)
Safety drain cycle - Cycle stops with door open
Safety drain cycle - Cycle stops with door
unlocked
16/24
Machine status/action Reset
START/RESET
START/RESET
START
ON/OFF
RESET
RESET
RESET
599 74 08-64