5. HOW TO SET SCANNING CONDITIONS
• Set the resolution according to the size of the text in the original that you are to send.
If you do not set the resolution, the original is sent at the resolution set in the Default Setting for
Document Mode. (
2
STANDARD: Select this setting when the text in the original is regular size.
FINE:
U-FINE:
Tip
If the remote FAX cannot receive originals at the same resolution, the resolution of the sent original
is automatically converted before it is sent. The finer the resolution, the longer it takes to send an
original.
1
Press the
2
Press the
in the FAX mode.
3
Use the
resolution mode.
Press the
• To cancel setting midway, press the
2-10
BASIC OPERATION
How to Set the Resolution
See page 4-24.)
Select this setting when the text in the original is small or you are sending a detailed
drawing.
Select this setting when the text in the original is particularly small or you are sending a
precision drawing.
key.
key with the initial screen shown
or
key to select the desired
key to complete the setting.
ENTER TEL NUMBER(MAX128):
RESOLUTION : STANDARD
ENTER TEL NUMBER(MAX128):
RESOLUTION:
key.
FINE
U-FINE
STANDARD
FINE
U-FINE