Bowflex The Ultimate 2 Assembly Instructions Manual page 34


Cable Installation STEP 4
Tool:
• Hex Key (7/32")
a. U ncoil the Cable from Lower Pulley and remove the
Ball Stop. (See Step 1/Figure A)
b. I n Box 4, locate a Single Pulley Assembly with one
Cheek. Wrap the Cable under the Pulley and feed the
Cable through the hole in the Rod Box. (See Figure
A)
c. Install the Single Pulley (See Figure B) making sure
the cable is between the Pulley and the small Metal
Post on the Pulley Bracket.
(See Top View of Angled Pulley)
d. F eed the Cable through the lower half of the Floating
Pulley Assembly.
Pulley Bracket
Metal Post
Pulley
Top View of
Angled Pulley
Installing Your Bowflex Ultimate
Cable
2 Cables
®
Rod Box
Lower Pulley
Figure A
Figure B
Single Pulley
Floating Pulley
Assembly