Bowflex The Ultimate 2 Assembly Instructions Manual page 22

2
NOTE: Before you continue, be sure you have a minimum of " ('") of ceiling height to insert the
Upper Lat Assembly into the Lower Base (see step 17).
STEP 12
Parts:
• Left Lat Boom (Box 6)
• Rear Pulley Frame (Box 6)
• Side Plate (Box 4)
Tool:
• Hex Key (3/16")
12-1 I nsert RearPulley Frame into
holes in Left Lat Boom.
Make sure the Pulley frame
Swivel is parallel to the planes
A and B shown in the Side view.
12-2 Align holes in Side Plate and Lat Boom.
12-3 Install but do not tighten hardware.
Hardware (1:1):
2 Pan Head Allen Bolt (3/8" X 3/4")
STEP 13
Parts:
• Pulley Frame Boom Assembly (from step 12)
• Lat Bar (Box 6)
Tool:
• Hex Key (3/16")
13-1 I nsert left side of Lat Bar into Left Boom.
13-2 Install but do not tighten hardware.
Hardware (1:1):
1 Pan Head Allen Bolt (3/8" X 3/4")
Assembling Your Bowflex Ultimate
Pan Head Allen
Bolt
Washer
Side Plate
2 Washers (3/8")
1 Washer (3/8")
Left Lat Boom
Rear Pulley
Frame
Lat Bar
Pan Head Allen
Bolt
2
®
Side View
Plane A
Swivel
CORRECT
Plane A
Swivel
INCORRECT
Pulley Frame, Left Boom
Assembly
Washer
Plane B
Plane B