Making Your Own Audio Breakout Cable - Blackmagicdesign ATEM Television Studio Installation And Operation Manual

Using Audio
106

Making Your Own Audio Breakout Cable

If you have an ATEM Production Switcher, then you can use the included breakout cable or make your own
custom breakout cable to connect your mixer's professional, balanced, analog audio output to the switcher.
The table on the next page shows a pinout diagram for making your own custom cable. It connects to the
switcher with a DB-15HD connector.
There are slight physical variations in different brands of DB-15HD connectors which can cause problems
connecting to the audio port on the switcher. It's a good idea to test plugging in your DB-15HD connector
before spending time wiring your custom cable. You can use the DB-15HD connector on the included
breakout cable to provide physical guidance when sourcing your own DB-15HD connectors.
You can use the DB-15HD connector on the included audio breakout cable to provide physical guidance when
sourcing your own DB-15HD connectors.