NEC MultiSync LCD1920NX User And Service Manual page 69

Note 1:
According to the designation of sync signals and the setting of each inspection mode, the analog outputs
(BNC) of the signal generator shall be connected as specified below. (Except the cases when otherwise
specified)
1) SEPARATE: R/G/B CONNECTION, HS ←→ H, VS ←→ V, CS not connected
2) COMPOSITE: R/G/B CONNECTION, CS ←→ H
3) SYNC ON GREEN: R/G/B CONNECTION,
Note 2:
Option 2 Screen
No connections for HS and VS
No connections for HS, VS, and CS
5-11