Setting Airport Criteria - Garmin G300 Pilot's Manual

System Overview
Airspace Alarms (Single Display)
Nav Alarms (Single Display)

Setting airPOrt Criteria

The Page Menu on the Nearest Airports Page allows the pilot to filter out airports
that do not meet a defined criteria. Specific surface types and runway lengths can
be defined, as well as the option to include private airports and/or heliports.
• Runway Surface: Allows the pilot to set criteria for the type of surface on
the runway.
– Any: Shows any runway, regardless of surface type, including water landing
facilities.
– Hard Only: Shows only runways with a concrete, asphalt, or similar sealed
surface.
– Hard or Soft: Shows all runways except water landing facilities.
– Water Only: Shows only water landing facilities.
• Minimum Runway Length: Allows the pilot to enter a specific length for the
shortest runway allowed.
• Include Private Airports: Allows the pilot include Private Airports in the
search criteria.
44
Garmin G300 Pilot's Guide
Alarms (Dual Display - MFD)
190-00921-00 Rev. D