Power; Setting Airport Criteria - Garmin GPSMAP 695 Owner's Manual

POwer

Turning the power loss warning on/off:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...', and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Power' and press the ENT Key.
4) Turn the FMS Joystick to select 'On' or 'Off', and press the ENT Key.

SettiNG airPOrt criteria

The Page Menu on the Nearest Airports Page allows the pilot to filter out airports
that do not meet a defined criteria. Specific surface types and runway lengths can be
defined, as well as the option to include private airports and/or heliports.
Runway Surface—allows you to set criteria for the type of surface on the runway:
Any—shows any runway, regardless of surface type, including water landing
•
facilities.
Hard Only—shows only runways with a concrete, asphalt, or similar sealed
•
surface.
Hard or Soft—shows all runways except water landing facilities.
•
Water Only—shows only water landing facilities.
•
Minimum Runway Length—allows the pilot to enter a specific length for the shortest
runway allowed.
Entering airport criteria:
1) Press the NRST Key.
2) Turn the FMS Joystick to select the Nearest Airports Page.
3) Press the MENU Key to display the Page Menu.
4) Turn or move the FMS Joystick to select 'Set Airport Criteria', and then
press the ENT Key. The Airport Criteria Window appears with the current
settings.
190-00919-00 Rev. D Garmin GPSMAP 695/696 Owner's Manual
Overview
27