Topography - Garmin G300 Pilot's Manual

tOPOgraPhy

Topographic data can be displayed or removed as described in the following
procedures.
Displaying/removing topographic data:
1) Press the MAP Softkey on the Map Page. Press the VFR MAP Softkey
(if necessary).
2) Press the TOPO Softkey. Topographic data is displayed.
3) Press the TOPO Softkey again to remove topographic data from the
Navigation Map.
Or:
1) From the Map Page, press the MENU Key.
2) Turn or move the FMS Joystick to highlight 'Set Up Map', and press the
ENT Key.
3) Turn the FMS Joystick to highlight the 'Map' Category from the
horizontal list.
4) Move the FMS Joystick to highlight the 'Topo Shading' field.
5) Turn the FMS Joystick to select 'On' or 'Off', and press the ENT Key.
VFR MAP
Softkey
190-00921-00 Rev. D
Topographic Data (Map Page)
(Single Display)
Garmin G300 Pilot's Guide
gPS navigation
TOPO Softkey
85