Privacy Mode; Cellular Phone - Panasonic KX-TG7731C Operating Instructions Manual

Temporary tone dialing for
landline calls (for rotary/pulse
service users)
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
Press * (TONE) before entering access
numbers which require tone dialing.
Call share
You can join an existing outside call.
Important:
R When the privacy mode is on, you cannot
join the conversation. Turn it off.
To select the line that is being used for the call:
– for a cellular line press MCELL 1N or MCELL
2N.
– for the landline press MSP-PHONEN.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)

Privacy mode

When the privacy mode is "On" , the unit
prevents other users from joining your
conversations with outside callers. To allow
other users to join your conversations (call
share), leave this feature off. The default
setting is "Off".
1
MMENUN#194
2
MbN: Select "On" or "Off".
3
MSAVEN a MOFFN
R When the privacy mode is turned on,
is displayed during an outside
call.
TG7731_41C_(en-en)_1207_ver.021.29
Making/Answering Calls Using the Base Unit
Transferring a cellular call
between the base unit and a

cellular phone

Transferring a cellular call from the
base unit to a cellular phone
During a cellular call, press and hold MCELL
1N or MCELL 2N until the SP-PHONE indicator
goes out.
R The cellular call is transferred to the cellular
phone.
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the base
unit.
Using the other line during a
conversation
You can handle a cellular call and a landline
call at the same time. When another call is
being received during a conversation, the
interrupt tone sounds (page 38). You can
answer the 2nd call while holding the 1st call.
Making/answering a cellular call
during a conversation on the landline
1
Press MHOLDN during a landline call.
2
To make a 2nd call:
Press MCELL 1N or MCELL 2N. a Dial the
phone number.
To answer a 2nd call:
Press MCELL 1N or MCELL 2N.
R To hold the 2nd call, press MHOLDN.
3
To hang up the 2nd call and return to the
1st call (landline call), press
MSP-PHONEN 2 times.
Making/answering a landline call
during a conversation on a cellular line
1
Press MHOLDN during a cellular call.
29 2011/12/07 19:53:59
29