3.7.3 Call Control [Line 1]–[Line 8]
3.7.3 Call Control [Line 1]–[Line 8]
This screen allows you to configure various call features that are specific to each line.
3.7.3.1 Call Control
Display Name
Description
Value Range
Default Value
Configuration File Reference
Enable Privacy Mode
Description
110
Administrator Guide
Specifies the name to display as the caller on the other party's phone
when you make a call.
Max. 16 characters
Note
•
You can use Unicode characters for this setting.
Not stored.
DISPLAY_NAME_[1–8] (Page 216)
Selects whether to enable privacy mode, which prohibits another
handset or base unit from barging in on a conversation.
Document Version
2013-02