Using A Bluetooth Wireless Headset (Optional) For Landline Calls - Panasonic KX-TG7731C Operating Instructions Manual

Using a Bluetooth wireless
headset (optional) for
landline calls
By registering a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R 1 headset can be registered to the base
unit. However, only one Bluetooth device
(cellular phone or headset) can be
connected to the base unit at a time.
R For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
Registering a headset to the base
unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to registration mode.
R Refer to the headset operating
instructions.
2
Handset:
MMENUN#621
3
Enter your headset PIN.
R Typically, default PIN is "0000". Refer
to the headset operating instructions.
4
Press MOKN, then wait until a long beep
sounds.
5
MOFFN
R When the HEADSET indicator on the
base unit lights green, you are ready to
use the headset.
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the unit.
TG7731_41C_(en-en)_1207_ver.021.49
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
Base unit
*1 KX-TG7741/KX-TG275SK series: page 3
To connect:
Press MHEADSETN.
To disconnect:
Press and hold MHEADSETN until a long beep
sounds.
Handset
1
To connect/disconnect:
MMENUN#622
R A long beep sounds.
2
MOFFN
Deregistering a headset
You can cancel a registration of the headset
that is stored to the base unit. See
"Deregistering Bluetooth devices", page 21.
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
Answering landline calls with your
headset
To answer a landline call, turn on your
headset referring to your headset operating
instructions.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
headset;
– press MnN (STOP) on the base unit.
(KX-TG7731 series: page 3)
49
Using Bluetooth Devices
*1
2011/12/07 19:54:00
49