System Info; Setup Menu Flow Charts - Russound CAV6.6-S2 System Instruction Manual

INSTALLER
INSTALLATION MENU
Macro Editor (cont'd)
4. COMMAND TYPE (f) – Select the type of source command (e.g., CD, TV, etc.).
a. Selected: Learned IR Choose Learned IR if the pre-programmed IR code library does
not support the source component.
i. LEARNED SRC (f) – Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 6)
b. Selected: Unassigned Selected command and subsequent commands are cleared.
Procedure advances to COMMAND NUM (step 3)
c. Selected: Default Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 6)
d. Selected: Macro:
i. MACRO - A macro can "call" another macro if a sequence of more than 10
commands is needed.
ii. MACRO ID – Enter the macro ID number. Menu advances to COMMAND NUM
(step 3)
e. Selected: Delay Enter a 1- to 60-second delay time to postpone delivery of the
next command in the macro. Procedure advances to COMMAND
NUM (step 3)
f. All Other Selections: Procedure advances to DEVICE CODE (step 6)
5. DEVICE CODE (f) – Source component code for IR control.
6. KEY FUNCTION (f) – Select a function (Play, etc.).
SYSTEM INFO (m)
System Info allows the installer to view the controller's manufacturing build properties.
See Installation Menu on Page 48 and System Info - Flow Chart on page 69
#CONTROLLERS BUILD TIME BUILD DATE
1. #CONTROLLERS Displays the number of CAV6.6 controllers in the system.
2. BUILD TIME Displays the Software Build Time of the controller.
3. BUILD DATE Displays the Software Build Date of the controller.
4. VERSION Displays the software version of the CAV6.6.
58
VERSION
INSTALLER

SETUP MENU FLOW CHARTS

59